Menu Close

How to fix Lexmark Printer won’t Print Issue?

Printers are electronic machines that help you to get hard copies of images, documents, or any other things. You can easily print your documents or image from any device. But sometimes, you might face a Lexmark printer not printing issue while printing your documents with Lexmark printers. Try to find exactly what is causing a problem with your printer. Once you identified the exact reason, apply some troubleshooting methods to get out of it.

Lexmark Printer won't Print

Some Common Lexmark Printer Issues & Their Troubleshooting

There are some common issues that generally occur in Lexmark printers. These issues appear with some unique alphanumeric error codes. Check some tips for troubleshooting Lexmark printer problems from the below section:

Lexmark Printer not printing with “Document Failed to Print” Error Message

One of the most common Lexmark printer error messages that generally appear on your screen is “Document Failed to Print” or “Communication Not Available”. If you are facing this issue, then apply the following steps to get out of it:

  • Firstly, make sure that your computer and your Lexmark printer are properly connected to the same network.
  • Restart your printer. Sometimes, a simple restarting can fix most of the issues.
  • Unplug the printer from the power socket and check whether there is any paper stuck in the printer and if the toner is properly installed. If everything is OK, leave the printer disconnected for a while, then reconnect it and try to print a sample document.

If the above steps haven’t worked, you can uninstall and reinstall the printer on your computer again. This helps in re-establishing the connection between your devices and may help you to get out of the problem.

Lexmark Printer “Error 920.06” or “Service Fuser Error”

Lexmark error code 920.06 is mainly a service fuser error message that is displayed with a “Service Fuser Error” common error message. This error message is generally followed by any of the following error codes: 920, 921, 922, 923, 924, or 925. All of these error codes indicate that there is something wrong with the fuser unit of your printer.

To troubleshoot this issue, turn off the printer and wait for about 60-90 seconds. Then connect it again with the power socket to check if the issue has been solved. If the issue still persists, reinstall your Lexmark printer’s fuser unit. Also check if any paper is stuck in the unit, if there is any, remove it. If the problem exists even after reinstalling the fuser unit, then you might have to replace it.

Lexmark Printer Error: “Load MP Feeder”

One of the most common error messages indicates a “Load MP Feeder” error which means you have to load paper into the front-loading multipurpose feeder (MP Feeder). You can apply many methods to fix the problem.

Before feeding on the MP feeder, check whether the tray of your printer is properly loaded with paper. If the error message still exists even after the feeder being loaded with paper, it is most definitely caused because of a loose sensor flag or a bad sensor. In such a case, check if the sensor flag is hanging down while resting the paper on the tray. If you do not want your Lexmark printer to feed on the MP feeder, you need to change the default paper source from your printer’s settings, then try again.

Wrapping Up:

So, after applying the above-given troubleshooting steps, the issue will be automatically fixed. There are some more issues that you can face, try to identify the exact reasons behind those errors. To know why won’t my Lexmark printer print, you can refer to the printer manual.

Leave a Reply

Your email address will not be published. Required fields are marked *

error: Content is protected !!
%d bloggers like this: